Skip to content

How to Make Beaded Jewelry for Beginners | A Complete Guide

how to make Beaded Jewelry for Beginners

We present to you our guide on how to make beaded jewelry for beginners. Are you new to the world of DIY jewelry? If yes, beaded jewelry crafting is one of the easiest and most affordable ways to get started. Keep reading to find out all the information.

Making your own jewelry is so much more than just a hobby. It gives you the chance to relax and express your creativity in an enjoyable way. Learning how to make beaded jewelry might seem like a monumental task at first, but in reality, you need to know the fundamental techniques to master the creative art form. In this blog, we will teach you how to make three different beadwork project items from scratch. So, without further ado, let’s get right to it!

How to Make Beaded Jewelry for Beginners | Step-by-Step Guide

Understanding the DIY jewelry tools and materials is essential when learning how to make beaded jewelry as a beginner. To get started, you’ll need wire cutters, pliers, beading cords, clasps, and other tools. It is also critical to choose the right bead base according to the size and material of your craft. However, with a plethora of DIY jewelry options accessible today, you may be unsure where to begin. To assist you on your beading journey, we have created a guide on how to make beaded jewelry for beginners. Here are the two easiest beaded jewelry projects to get you started:

1.   Beaded Necklace (How to Make a Beaded Necklace)

Do you have different types, sizes, and colors of beads lying around your house? Upcycle those beads to create a beautiful piece of beaded jewelry – a necklace! Once you learn the basic technique to make beaded necklaces, you can improvise it to create all kinds of neck pieces. These include double-layered beaded necklaces, minimal beaded necklaces, and boho-beaded necklaces. To make this piece of DIY jewelry, you will need the following supplies:

  • Teardrop Bead
  • Seed Beads
  • Jump Rings
  • Headpins
  • Bead Clamps or Bead Tips
  • Beads of Different Sizes
  • Lobster Claw Closure
  • Craft Pliers
  • Scissors
  • Needles

Follow the below-mentioned guide to the tee to create a customized beaded necklace:

  • Step 1: Preparing the thread with a needle is the first step to crafting a beaded jewelry item. Use two strands in case you are using a regular cotton thread. Start inserting the bead clamp or bead tip through the cord while ensuring that the loop part faces outwards.
  • Step 2: Now tie a knot at the open end of the threat, making sure that it’s bigger than the size of the hole on the bead tip.
  • Step 3: Bring the cap part of the bead tip close enough to touch the knot and lock it inside. In order to do this, apply a small amount of glue to the knot and close the bead tip’s caps.
  • Step 4: Now, pick up the jump ring and insert it through the bead tip into the thread. By doing so, you will be making one side of the thread secure for beading.
  • Step 5: For this beaded necklace, we are using different colored small faux pearls and seed beads. The plan here is to add a small faux pearl after adding four to five seed beads. When threading in the beads, make sure to stop with approximately 3-inches left at the open end of the thread.
  • Step 6: Push all the beads inwards, ensuring that the beading is even and looks nice. Now insert the needle from the other end of the last seed bead and pull it all the way through.
  • Step 7: Insert the second beading tip and thread it to the open end of the beaded string. Now using the remaining thread, tie several knots before closing the beading tip as we did in “Step 3.”
  • Step 8: Use a jump ring to attach the lobster claw hook with the bead tip. Lock both ends of the necklace and show off your first-ever beaded jewelry creation.

Creating a beaded necklace will take you around 20 to 30 minutes, depending on your beading and jewelry-making skills. Show off your DIY jewelry crafting skills by either pairing the beaded necklace with your favorite dress or gifting it to your loved ones. 

2.   Beaded Bracelet

Stretchy beaded bracelets are the perfect beginner DIY jewelry-making project. Not only are they easy and fun to make, but are also very economical. Moreover, depending on the beads you have, you can use this same method to make dressy or casual beaded bracelets. Keep on reading if you are ready to get started with this beaded jewelry project.

Before we jump to the step-by-step guide, make sure that you have the following supplies:

Now that you have all the necessary supplies, let’s craft your very own beaded piece of DIY jewelry:

  • Step 1: Start by cutting the length of the cord about four to six inches longer than your original bracelet size. Now attach the bead stopper approximately three inches from the endpoint of the cord.
  • Step 2: In order to prevent the cord from becoming saggy, pre-stretch it from the top to the bottom.
  • Step 3: Now attach a big-eye needle to the open end of the stretch cord and fold it over two inches. There is no need to affix a needle if you are using beads with larger holes.
  • Step 4: String all the seed beads into the cord. Also, while doing so, make sure to occasionally check the length of the bracelet by wrapping it against your wrist. Ideally, there should be some space between the bracelet and your skin.
  • Step 5: Because the ends are usually slippery, knotting your beaded bracelet takes the most practice. Remove the needle and the bead stopper from the cord and carefully bring both of these ends together. To tie a knot, place one of the free ends across the folded end and loop it in. 
  • Step 6: In order to hold the seed beads in place, apply a small dab of glue over the knot.
  • Step 7: While the glue is still wet, hold the cord between two seed beads and tug it inside one of the beads. By doing so, you will be making a double knot. Now, let the glue dry, and then use the embroidery scissors to trim the excess cord.

How easy was that? Beaded bracelets are customizable, colorful, and comfortable to wear. This makes them a great addition to your jewelry wardrobe. Remember that practice makes one perfect. Therefore, with just a little practice, you easily create an armful of new beaded jewelry items in no time.

Beaded Earrings

3. Beaded Earrings

Here are some step-by-step instructions for making beaded earrings:

Beading Supplies for Earrings:


  • Step 1: Choose the beads you want to use for your earrings. You can use any type of beads, but make sure they are small enough to fit on the headpins.
  • Step 2: Take a headpin and slide a bead onto it. Bend the headpin at a 90-degree angle about 1/4 inch above the bead.
  • Step 3: Using your pliers, grip the bent part of the headpin and twist it to form a loop.
  • Step 4: Slide the loop onto the earring hook and use your pliers to close the loop securely.
  • Step 5: Repeat steps 2-4 for the second earring.
  • Step 6: Once you have finished both earrings, use your pliers to adjust the loops so that they hang evenly.
  • Step 7: Your beaded earrings are now ready to wear!


  • You can use different sizes and colors of beads to create a unique design.
  • If you want to add more beads to your earrings, simply slide them onto the headpin before forming the loop.
  • You can also use different types of earring hooks, such as fishhooks or lever backs, depending on your preference.

How to Make Beaded Jewelry for Beginners Wrapping Up!

These are only the two most basic beaded jewelry ideas that we’re sharing. However, we are sure that you will come up with many more DIY jewelry designs as soon as you get the hang of the technique. If you are a beginner at making DIY jewelry, we hope that this guide helped you learn the basics of creating beaded jewelry at home. Share your DIY jewelry creations with us, and let us know what you think!

You Might Also Like:

DIY Wire Rings With Beads Ideas For Girls

5 Rhinestone and Crystal Applicators for DIY Bedazzling

How to Make Beaded Jewelry for Beginners FAQ

1. What are the basic materials I need to make beaded jewelry?

In order to make beaded jewelry, you will need beads, a stringing material (such as beading thread or wire), clasps, pliers, and a cutter. These are the basic materials you will need to create a simple piece of jewelry.

2. How can I learn how to make beaded jewelry?

If you’re a beginner, there are many online resources and tutorials that can help you get started with jewelry making. You can also attend jewelry-making classes or workshops in your area.

3. What types of beads can I use to make beaded jewelry?

There are many different types of beads you can use, including glass beads, seed beads, pearls, and gemstones. You can choose beads that are all the same color or mix and match different colors and shapes to create a unique piece of jewelry.

4. What is a crimp bead?

A crimp bead is a small metal bead that is used to secure the ends of the stringing material. You can use pliers to crimp the bead and hold the stringing material in place.

5. How do I string beads?

Stringing beads is fairly simple. First, cut your stringing material to the desired length and attach one end to a clasp. Then, string your beads onto the stringing material until you reach the desired length. Finally, attach the other end of the stringing material to the other half of the clasp. You can also add a knot or crimp bead to hold the beads in place.

6. What is a jump ring?

A jump ring is a small metal ring that is used to attach the clasp to the end of the stringing material. You can use pliers to open and close the jump ring.

7. How do I make a beaded bracelet?

To make a beaded bracelet, there are different methods you can use. One way is to make a stretchy bracelet by measuring your wrist and cutting elastic to size. Another way is to make a beaded bracelet with an adjustable cord by preparing the cord and beading, selecting beads, and tying knots. Another option is to make a beaded stretch bracelet by preparing a length of stretch cord, affixing a bead stopper, and stringing beads.

Leave a Reply

Your email address will not be published. Required fields are marked *